Substrate: PET
Glue thickness: customizable
180 ° steel plate peeling force: ≥ 10N/25mm
T-type peel force: ≥ 12N/25mm
Flame retardant grade: VTM-2
Coming From China, Marketing To The World.
Substrate: PET
Glue thickness: customizable
180 ° steel plate peeling force: ≥ 10N/25mm
T-type peel force: ≥ 12N/25mm
Flame retardant grade: VTM-2
The YH-TFW 36#+14 VTM-2 White Aerogel Flame Retardant Packaging Film is a high-performance packaging film designed specifically for battery protection layers. It is made from a PET substrate, providing mechanical properties and durability, ensuring protection for batteries against external environmental factors.
The adhesive thickness of this product is customizable, offering flexibility to meet various application needs. The YH-TFW 36#+14 VTM-2 White Aerogel Flame Retardant Packaging Film has a 180° steel plate peel force of ≥10N/25mm and a T-peel force of ≥12N/25mm, ensuring sufficient adhesion and stability during use.
With a flame retardant rating of VTM-2, the YH-TFW 36#+14 VTM-2 White Aerogel Flame Retardant Packaging Film offers fire resistance, providing an important safety guarantee for battery products. During the long-term use of the battery, it effectively reduces the risk of potential hazards caused by heat or sparks.
|
Substrate |
PET |
|
Glue thickness |
Customizable |
|
180 ° steel plate peeling force |
≥ 10N/25mm |
|
T-type peel force |
≥ 12N/25mm |
|
Flame retardant grade |
VTM-2 |
Founded in 2012, As China YH-TFW 36#+14 VTM-2 White Aerogel Flame Retardant Packaging Film suppliers and YH-TFW 36#+14 VTM-2 White Aerogel Flame Retardant Packaging Film company, Anhui Yanhe New Material Co., Ltd. is located on a 17-acre site in Guangde Economic Development Zone West. The Company mainly develops and manufactures specialty labeling materials, functional tapes for the electronics industry. adhesive products for various functional film materials, and is able to fully meet the technical requirements of its customers' products by applying corresponding surface coatings based on the functional requirements of the customers' different surfaces. With the industry's advanced new material research and development technologies, customized manufacturing capabilities, and the ability to collaborate with universities and scientific research institutions at home and abroad, we are committed to providing customers with integrated solutions for functional materials.
A converter running a 1.6 m wide label line notices that every afternoon batch fails the 180° peel test by 8 to 12 percent while morning batches pass. No formulation changed. What...
READ MOREA label converter receives a drawing marked “glue here.” Purchasing buys a general-purpose glue, the first rolls run well, and three weeks later the labels lift at a cold-storage ...
READ MOREA label converter running a powder-coating line once called us about a 50 µm clear PET masking roll that had curled at the edges inside a 190 °C curing oven. The film was fine at ...
READ MOREA laptop battery packer in Guangdong rejected three foam shipments in one quarter. The adhesive held on the PET carrier, but it crept at the die-cut edge after four hours at 60 °C...
READ MORE